Bore Threaded
Bore Threaded
 |
STRC Threaded Alum Big Bore Front Shock Bodies RE SLASH Sale Price: $16.41  |
DescriptionST Racing Concepts Aluminum Threaded Front Big Bore Shock Bodies (2) Red for Traxxas Slash 4x4, Slash 2WD. #ST3765XRManuf. Notes:STRC CNC Machined Threaded Aluminum Front Shock Body Set 1 pair Slash 4x4 & Slash 2WD (red) The CNC Machined Aluminum front racing shock sets feature threaded aluminum shock bodies with O-ring installed pre-load collars in which the O-ring secures your pre-load adjustments in place... |
 HPI Vorza Threaded Aluminum Big Bore Front Rear Shocks Shock Fit D8S HB D8 Ve8 US $64.99 
|
 STRC Threaded Alum Big Bore Front Shock Bodies GM SLASH US $16.41
|
 STRC ALUMINUM BIG BORE THREADED FRONT SHOCK BODIES SET Blue 1 PAIR STRST3765XB US $19.99
|
 Traxxas Big Bore Threaded Blue Alloy Rear Shock Bodies US $15.75
|
 STRC Threaded Alum Big Bore Rear Shock Bodies BU SLASH US $17.24
|
 STRC Threaded Alum Big Bore Front Shock Bodies BU SLASH US $16.41
|
 Kyosho 55mm Threaded Short Big Bore Shock Body Set 2 US $42.99
|
 STRC ALUMINUM BIG BORE THREADED REAR SHOCK BODIES SET Red 1 PAIR STRST3766XR US $20.99
|
 STRC ALUMINUM BIG BORE THREADED FRONT SHOCK BODIES SET RED 1 PAIR STRST3765XR US $19.99
|
 STRC ALUMINUM BIG BORE THREADED REAR SHOCK BODIES SET Gun Metal 1 PAIR US $20.99
|
 STRC ALUMINUM BIG BORE THREADED FRONT SHOCK BODIES SET Gun Metal 1 PAIR US $19.99
|
 STRC ALUMINUM BIG BORE THREADED REAR SHOCK BODIES SET Silver 1 PAIR STRST3766XS US $20.99
|
 STRC ALUMINUM BIG BORE THREADED FRONT SHOCK BODIES SET Silver 1 PAIR STRST3765XS US $19.99
|
 STRC ALUMINUM BIG BORE THREADED REAR SHOCK BODIES SET Blue 1 PAIR STRST3766XB US $20.99
|
 STRC Threaded Alum Big Bore Rear Shock Bodies GM SLASH US $17.24
|
 Traxxas Big Bore Threaded Silver Alloy XXL Shock Bodies US $12.83
|
 Kyosho 55mm Threaded Medium Big Bore Shock Body Set 2 US $42.99
|
 STRC Threaded Alum Big Bore Front Shock Bodies RE SLASH US $16.41
|
 Kyosho Threaded Short Big Bore Shock Set 2 KYOIF471 US $72.99
|
 Aluminum Threaded 132 Big Bore Shock TD132SC01 SC10 US $26.34
|
 Aluminum Threaded 102 Big Bore Shock TD102SC01 SC10 US $26.34
|
 Kyosho Threaded Medium Length Big Bore Shock Set 2 US $83.99
|
Do M3 or M4 set screws exist that have a smooth shaft/shoulder on the socket end, only threaded at other end?
It would have a limited threaded section, and the smooth, socket side protrudes. I want to use the exposed part as a side-bearing surface, in a narrow channel where a regular cap screw head would be of too great a diameter. In that sense it would not serve the traditional purpose as a set screw, so it may have a different name. References appreciated.
Also, the smooth shoulder should be greater than (but not a lot greater) than the nominal diameter, so as to provide a stop for the threading.
Unless you have access to a lathe to trim existing screw parts you will not find exactly that.
If you use any standard set screw it will not have the bottom wider than the threaded shank. You might be able to get a thumb screw with a small head that will fit your channel and will not stick up too high with the threaded part on the bottom. You could try looking over a catalog like this one http://www.wclco.com/pdf/thread/WCLTF20.pdf to maybe get lucky because they seem to have some low head ones already available.
If you were going to pay for machine time then any job shop could do screws from rod stock to match your needs on a per hour basis. See if a local vocational school could do that cheaply. If you have the machinist skills see if a Voke school would give you an hour's time during lunch hour or right after school to make the parts yourself.